5000V SP power cable

Round Shielded 3C with Ground EPR/PVC Submersible Pump Cable  5KV - SUBMERSIBLE PUMP SHIELDED POWER CABLE TYPE MV-105 3 CONDUCTORS WITH GROUND

Conductors: Consist of uncoated soft, copper strands meeting the requirements of ASTM B3. Conductor shall be supplied as Class B compact per ASTM B496. Conductor Shield: Consists of an extruded semiconducting layer. Insulation: The insulation is ethylene-propylene rubber (EPR) extruded in a single pass with the conductor and insulation shields to the wall thickness. Insulation Shielding: Consist of a semi-conducting extruded compound and a 5 mil bare copper metallic tape shield overlapped a minimum of 20%. Conductor Coding: Phase identification for multiconductor cables is provided by a colored stripe on the insulation shield of each of the conductors (red, black, white). Ground: Standard multi-conductor cables include one stranded bare copper ground in one of the outer cable interstices. The ground wire is sized per UL requirements. Custom ground wire sizes and configurations are available upon request.. Assembly: Conductors and ground wire are cabled together with a left hand lay and suitable fillers are used in the interstices to round out the cable cross section. A mylar binder tape is applied overall. Jacket: A sunlight and ozone resistant jacket of polyvinyl chloride (PVC) or chlorinated polyethylene (CPE) is extruded over the single and multiconductor assembly.

Shielded, Medium Voltage and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.

Download File 'P7376-SP.pdf'