5000V armored SP cable

EPR/AIA/PVC Submersible Pump Cable SUBMERSIBLE INTERLOCKED ARMORED PUMP CABLE SHIELDED 5KV TYPE MV-105 OR TYPE MC 3 CONDUCTORS WITH GROUND

Conductor: Consist of uncoated soft, copper strands meeting the requirements of ASTM B3. Conductor shall be supplied as Class B compact per ASTM B496. Conductor Shield: Consists of an extruded semiconducting layer. Insulation: The insulation is ethylene-propylene rubber (EPR) extruded concentrically over the conductor to the wall thickness. Insulation Shielding: Consist of a semi-conducting extruded compound and a 5 mil bare copper metallic tape shield overlapped a minimum of 20%. Conductor Coding: Phase identification is provided by a printed color stripe on each insulated conductor (red, black, white). Ground: One stranded bare copper ground in one of the outer cable interstices. The ground wire is sized per NEC/UL requirements. Assembly: Conductors and ground wire are cabled together with a left hand lay and suitable fillers to make the cable round. A binder tape is applied. Armor: Over the taped assembly there is an interlocking armor of either aluminum or galvanized steel. Jacket: A protective sunlight and ozone resistant jacket of polyvinyl chloride (PVC) or chlorinated polyethylene (CPE) is extruded for a tight fit over the interlocked armor.

Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.

Download File 'P7375-SP.pdf'