Conductors: Bare, annealed copper Class B stranded in accordance with ASTM B-8. In sizes 8AWG to 750 MCM, the conductors are stranded to reduce cable diameter and weight. Insulation: Cross-linked polyethylene. Meets CSA C22.2 No. 38 type RW90 for unshielded. Conductor Coding: 14 AWG to 2 AWG: Colored Insulation. 1 AWG and larger: printed color stripe. Assembly: Conductors are cabled in concentric layers with grounding wire, interstices are filled with suitable non-hygroscopic fillers, as required. A binder tape of synthetic material assembles the core in an essentially round configuration, as required. Inner Jacket: Black polyvinyl chloride jacket per CSA C22.2 No. 131-M89, 90˚C temperature rating, flame-retardant, low-acid-gasemitting.. Armor: Interlocking aluminum tape armor applied directly over the inner jacket. Outer Jacket: Overall polyvinyl chloride jacket per CSA C22.2 No. 131-M89, low acid gas emission, limited flame spread and excellent corrosion resistance. Jacket color is black for 600V and 1kV cables.
Armored and designed for maximum continuous conductor temperature of 90˚C with emergency overload of 130˚C and a short circuit condition of 250˚C, type Teck90. Suitable for severe conditions in industrial application and wet locations. Cables may be installed in racks, trays ladders and cable troughs, are rated for hazardous locations and suitable for use as a submersible cable.
• Rated for Hazardous locations • Excellent mechanical and physical properties • Sunlight and oil resistant jacket • Suitable for direct burial • Suitable for use in cable tray and embedment in concrete.
Paige has earned ISO 9001:2015 certification for its factories in Columbus, NE and Silao, Mexico. We are dedicated to ensuring customer satisfaction and continual improvement, while embracing sustainability practices.
